Handlekurven er tom
Handlekurven er tom
-
0
-
Metervarer
-
Mønster og bøker
-
Symaskintilbehør
-
Symaskiner
- Sytilbehør
-
Merker
- Nyheter
- Tilbud
Se alle produkter
Handlekurven er tomUsikker på hvor du skal starte
Se våre nyheter
Se alle produkter
-
Symaskiner
Se alle produkter
-
Symaskintilbehør
Se alle produkter
-
Mønster og bøker
Butikken vår er i Haugenveien 25, 1423 Ski
Størrelser: 32-52.
Ebba is an oversize sweatshirt in a comfortable fit. The sweatshirt is sewn with a collar and zipper that extends about halfway down. You can also sew a neckband instead.
The sweatshirt can be finished in 3 ways: with a waistband; hemmed; or hemmed with a drawstring. The two hemmed versions are somewhat cropped.
Ebba can be sewn in knit fabrics, preferable medium to medium heavy weight. Think college, fleece, knit jacquard, ponte or similar fabrics.
But one of the awesome things about Ebba is that you can also make it in wovens! Fabrics without any stretch at all. And thanks to the generous fit, Ebba can also be worn as light outerwear.
Skill level: 2/3
YOU WILL NEED:
- Knit fabric in medium to medium heavy weight (approx. 200-340 g/m2), for example college, french terry, sweatshirt, knit jacquard, ponte di roma and fleece. The fabric should have good recovery, meaning that if you stretch it and then let go, it will return to its original width. Alternatively woven fabric without stretch (only if you’re sewing Ebba with a zipper), light to medium weight (approx. 110-270 g/m2). But still, one would also need ribbing fabric (see below).
- Ribbing fabric (or other knit fabric with very good stretch and recovery), with 70-80% stretch, for the sleeve cuffs and neckband.
- Non-separating zipper, see length below. It’s okay to use a longer zipper, you can cut it off to the correct length.
YOU WILL ALSO NEED:
- Fusible interfacing for the collar and zipper. I recommend Vlieseline H200, which is soft and provides light stability. You will need about 20 cm.
- If you want to finish the lower edge with a drawstring: one double cord lock and elastic cord, 2-3 mm thick and approx. length: the sweatshirt’s waist width + 8 cm. Also, two eyelets, 5 mm wide, and tools to attach them (for example Prym pliers).
- Optional: bias tape (approx. 40 cm) to sew a neat finish on the zipper’s back.
- Useful tools: Aqua glue marker, tape measure, fabric scissors, pins/clips, iron, sewing machine with coordinating thread and suitable needle for your fabric (a stretch needle is recommended for knit fabrics, and universal needle for woven fabrics).